Mini Minecraft Inspired Action Figure

Current Version: FixV1-2-3

ATTENTION! V3 is live on my page as of 14/07/2025! Find it here C:

Over the last six months or so, I created this project to learn about 3D printing. I've spent about 60 dollars and more miscellaneous expenses to make this design work as well as it does (and it still needs more work). But as is, it's one of the most fun, entertaining things to mess around with! I call him hyper articulated Steve, because it has as much articulation as I could stuff into a size as small as this while keeping it accurate to Minecraft.

Size: about 68mm by 12mm by 40mm.

Material: Designed for PLA, but PETG works better.

Assembly: It's pretty intuitive. But long pins go in long holes, same for short pins.

Features: joints in the shoulders, elbows, hips, waist, knees, head, neck. One of the hands has a small slot that can swap between a cover and a sword.

Warning: I recommend either maintaining the scale or editing stuff on your side while changing scale as the tolerances and clearances are specific to this little fellow.

Update(20/06/2024): Fixed tight hip joint and clearance in the hip joints.

Update(23/06/2024): Revamped all of the clearances and made the pins looser which should solve the breaking pieces and tight fitting. Thanks for the feedback! And sorry for messing up so much!

Update(11/08/2024): Hopefully, the final fix. Fixed the shoulders and head, should not be tight anymore. Joints are much looser, paper/glue for tightening. I will fix that too, eventually, a little busy atm. Also, I have a ko-fi (link)!