F1H2O boat - rubber band powered racing special - Free 3D Print Model

Search models, users, collections, and posts

3D-decor.cz

Toys & Games>Outdoor Toys

IP Report

Print Profile(2)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

A1 mini - AMS - PLA - 0.2mm layer, 2 walls, 5% infill

Designer

3.7 h

1 plate

4.5(34)

A1 mini no ams PLA 0.2mm layer, 2 walls, 5% infill

Designer

1.5 h

1 plate

4.5(33)

Open in Bambu Studio

Boost

447

1072

1.4 k

757

Released

Description

F1H2O racing special rubber band powered for pool racing.

Experience the exciting atmosphere of exciting races of the best F1H2O specials right in your pool.

Print a few models and organize a race with your friends. Try which tire and which tunning parts gives the boat the most power and tune your racing machine to maximum performance.
Enjoy a lot of fun in exciting races. You can compete, for example, to see which boat sails faster, which sails the furthest, or which sails the most accurately across the set course.

I recommend setting the hull filling to 5% so that the weight of the ship is as low as possible. Print all the parts and glue them with a suitable glue. You can create the original coloring of the boat by alternating filaments in individual layers.

Enjoy the summer racing to the fullest. Don't forget to send photos of your tuned machines or publish videos from your races in the comments.

If you like my models, I will be happy if you give a Boost, Like, Follow, or Share with your friends.

Boost Me (for free)

Thank you to everyone who boosted my models :-)

Don't forget to check out my other models too.

Show all models

fun activities with kids

Comment & Rating (84)

@Felfynflo

Print Profile

A1 mini no ams PLA 0.2mm layer, 2 walls, 5% infill

2 der 3 schaufelräder wurden mit defekten schaufeln gedruckt. der rest ist einwandfrei von der qualität.

(Edited)

The profile uploader has replied

@3D_decor.cz

Try to reduce the first layer, thoroughly degrease the board or use a raft for printing paddle wheels.

@Felfynflo

thanks for your tips, but i‘ve never had any problems with adhesion before or after that print. therefore i think it may be a problem with the old filament or something. as seen in the picture the bottom-layers are perfekt. suddenly in the upper layers there are peaces missing. i will try it again some day with newer filament.

@Domas_kzn

works very well!

@Seamstressy

Boosted

Print Profile

A1 mini - AMS - PLA - 0.2mm layer, 2 walls, 5% infill

Boat printed wonderfully. What a great science toy for children! And fun to print. Thank you so much!

@aznboi128

Print Profile

A1 mini no ams PLA 0.2mm layer, 2 walls, 5% infill

great design!

@SpencerBub

Boosted

Print Profile

A1 mini - AMS - PLA - 0.2mm layer, 2 walls, 5% infill

@RCSAlex

Print Profile

A1 mini no ams PLA 0.2mm layer, 2 walls, 5% infill

Other Issues

The profile uploader has replied

@3D_decor.cz

Please tell me specifically what makes my profile so bad and why you gave such a low rating.

@RCSAlex

I'm sorry to say that but nothing worked. Everything of the print got turned around or moved. Pherhaps you can Tell me what could be the problem. If IT works then I will recommend your print. If my english is wrong please don't be angry. Im from Austria and normaly speak german. Please come back to my.

@3D_decor.cz

Replying to @RCSAlex :

What type of printer are you using? So the problem is that the parts don't stick to the board and move around during printing?

@user_2216444356

Boosted

pls tell me how to put on rubber band

The designer has replied

@3D_decor.cz

Place the rubber ring between the wheel blades and then place the whole thing on the mounts in the hull of the boat. This can be seen in detail in the photos of the model.