Flaming Fox V8
Print Profile(9)
Bill of Materials
Description
Membership
“Get commercial access to this model for just $20 a month.”
Boost Me (for free)
Flaming Fox V8 engine《FF-V8》
author：WHANGENG
Size: 217X160X151mm
Total mass: 1.1-1.2KG
Mass: Calculated according to the configured configuration: A1min
Printing time: A1mini: 47h
Mounting accessories: 3M14mm, 103 ±1pcs; 2M10mm, 52±1 pcs
Screw Type: Countersunk screws
MATERIAL CONSUMPTION: 1+ VOLUMES
Material recommendation: PETG/PLA
Date of manufacture：2024.6.14
Last updated date：2025.12.25
Other Notes
Note: When installing the top two pinions, the buckle should not be pressed too tightly, otherwise the operation will be affected.
When installing, be careful to leave a little gap for moving parts
1.To install the drive module, it is necessary to lubricate the model, which can reduce friction noise of mechanical components (such as the crankshaft, gears, pulleys, fixed shaft covers, etc.).
2.For the drive module, please refer to the PDF for the parts list. The total cost is less than 10 yuan.
3.If you need to replace it with the drive version, please print the configuration released by the author. Thank you.
Documentation (3)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (654)