Original Pokédex - Free 3D Print Model

Search models, users, collections, and posts

Big O

Props & Cosplays>Other Props & Cosplays

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.16mm layer, 3 walls, 15% infill

Designer

7.9 h

1 plate

4.8(14)

Single Colour Print Profile

Designer

3.5 h

1 plate

5.0(1)

Open in Bambu Studio

Boost

146

357

363

125

Released

Description

This is a replica pokedex with a working hinge.

The hinge is printed as part of the deisgn and functions without any needed work. It can be a little tight so I'd recommend sanding the hinge to make It smooth If this Is the case.

When printing using Bambulab PLA I'd recommend increasing the bed temperature to 60 degrees, turning off the auxilary fan (on P1S/X1) and closing the door (P1S/X1) as I've run Into problems with warping and these changes have fixed It for me.

Printed on P1S.

pokemon

pokedex

print in place

Comment & Rating (25)

@brandonzgadzaj

Print Profile

Single Colour Print Profile

Not too hard to break loose and I made little inserts to switch out cards

@user_925124396

Can you upload your version ?

@brandonzgadzaj

Replying to @user_925124396 :

Ill see if I can find the adjusted one my wife made for this

(Edited)

@user_925124396

Replying to @brandonzgadzaj :

I scale it down (80%) to fit on my A1 mini, then I made cut for card first come out too small. I will make another try next day I have project arleady.

@user_925124396

I've made small remix to fit A1 mini, ~80% size, I made cut for pokemon cards 3rd come fine, but hinge dont close as smooth as I'd like but it works and it can be closed. Lot of bridges so be carefull ablout that.

@zackza

I'd like.a scaled down version thats just red and some.black and one for 1 color printer p3ople with no ams would.be cool ..but ya let's get a tiny keychain version of this for people who wanna just try something less fimament

The designer has replied