Fall Maple Leaves - HueForge

Original photos of fallen maple leaves make for a fun HueForge Experience! Play with colour and sizes to make a lovely array - I also used my heat gun to create some movement with the leaves.

Maple Leaf 1 - Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA PolyTerra Army Brown Transmission Distance: 0.3
PLA PolyLite Red Transmission Distance: 1.5
PLA PolyLite Yellow Transmission Distance: 11
PLA PolyLite Pro Light Yellow Transmission Distance: 3

Swap Instructions:
Start with Charcoal Black
At layer #4 (0.4mm) swap to Army Brown
At layer #7 (0.64mm) swap to Red
At layer #13 (1.12mm) swap to Yellow
At layer #18 (1.52mm) swap to Light Yellow for the rest.
 

Maple Leaf 2 - Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA PolyLite Pro Orange Transmission Distance: 7.5
PLA PolyTerra Lava Red Transmission Distance: 1
PLA PolyTerra Savannah Yellow Transmission Distance: 3.5
PLA PolyLite Pro White Transmission Distance: 5

Swap Instructions:
Start with Charcoal Black
At layer #7 (0.64mm) swap to Orange
At layer #9 (0.8mm) swap to Lava Red
At layer #12 (1.04mm) swap to Savannah Yellow
At layer #18 (1.52mm) swap to White for the rest.