Cannabis faceplate for the X1 LCD screen: It fits seamlessly over the screen and includes a notch for the SD card. I modified the original design by enlarging it by 100.3% to ensure a better fit, and I added a single cannabis leaf to the left corner.

Please be sure to read the print profile settings below for optimal print quality.

Print Settings:

• Textured PEI Plate;
• 0.16 mm layer height;
• 0.20 mm initial layer height;
• 10 mm/s initial layer speed;
• 150 mm/s Outer wall speed;
• 0.3 mm initial layer line width;
• 5 Top shell layers;
• 0.8 mm Top shell thickness;
• 5 Bottom shell layers;
• .8 mm Bottom shell thickness;
• 15% Infill;
• Gyroid infill type;
• Colorized with IIIDMax apple green and black

If you enjoy this model, please help support with a Boost and check out my other models. Thank you!