3d print Amber USING PETG｜3d打印琥珀模型

Video: https://www.bilibili.com/video/BV1gy411z7rj/?spm_id_from=333.999.0.0

The spider model is from: https://makerworld.com/zh/models/430495?from=search#profileId-334982

In this model, it is only used to demonstrate how to encapsulate the model in transparent amber PETG. You can replace it with any model you want.

You need to use AMS / MAS lite, along with transparent filament.

Please follow my instructions exactly, otherwise, you will not achieve the transparent effect.

Set the layer height to 0.1.

Set the line width fill according to the settings provided in my file.

Turn off all model fans and do not turn them on at any time.

Set the material flow volume to 1.1.

Print two models at once, giving them enough time to cool naturally.

Enable time-lapse photography to give the models enough time to cool naturally.

This model requires two types of PETG filament.

Here is a message for the bambu Slicing Software team:

Please add a transparent color function and a transparent color preview function to the software.

Please find a way to add a variable flow volume; otherwise, the last layer will overflow too much.

If you have used the parameters from this paper to design other glass models, please cite and acknowledge the use of the experimental results from this paper.

Video（bilibili）：https://www.bilibili.com/video/BV1gy411z7rj/?spm_id_from=333.999.0.0

The spider model is from: https://makerworld.com/zh/models/430495?from=search#profileId-334982

In this model, it is only used to demonstrate how to encapsulate the model in transparent amber PETG. You can replace it with any model you want.

You need to use AMS / MAS lite, along with transparent filament.

Please follow my instructions exactly, otherwise, you will not achieve the transparent effect.

1. Set the layer height to 0.1.
2. Set the line width fill according to the settings provided in my file.
3. Turn off all model fans and do not turn them on at any time.
4. Set the material flow volume to 1.1.
5. Print two models at once, giving them enough time to cool naturally.
6. Enable time-lapse photography to give the models enough time to cool naturally.

This model requires two types of PETG filament.

Here is a message for the bambu Slicing Software team:

Please add a transparent color function and a transparent color preview function to the software.

Please find a way to add a variable flow volume; otherwise, the last layer will overflow too much.