Creditcard sized material swatch (1.34m filament)

The card itself has windows ranging from 0.2 mm to 0.8 mm to check for transparency/how light would shine through it and two small stripes (0.3 and 0.6 mm) to get a rough feeling on flexibility. Overall Thickness is 1 mm and dimensions closely match a credit card.

For labeling either apply a sticker or directly write on it. The writing should be protected as there is an 0.5mm reset.

For organizing, I use an A4 binder with A4 Pokemon trading card sleeves.

Note: Check the slicer setting. This version should work well with default settings. 0.1 mm layer height is recommended with 0.2 mm first layer layer height.