Small Hobby Vice Designed with Fusion 360 and Printed with the Bambu Lab X1 Carbon

This is a smaller version of a bigger vice I designed and printed.

The vice was designed using Fusion 360 and Printed with the Bambu Lab X1 Carbon Printer, the screw adapter was too snug in the carriage slider, I sanded it down slightly and applied some grease and it turned out fine, I used a standard 5mm Allen Head bolt for the sliding carriage thread securing, this screws into the channel on the end of screw thread adapter allowing the carriage to be returned.

All in all, another interesting project to design using Fusion 360 and print with the X1 Carbon, it turned out perfect, watch this space for another vice project that I have in mind.

Thanks for looking.

Update 17.01.2024 I have uploaded a different vice with more Tolerance on the screw thread, and guide rails to stop the threaded screw from flexing under pressure, check it out https://makerworld.com/en/models/132389#profileId-143504

buymeacoffee.com/kevr102