Honkai: Star Rail Sparkle Button
Print Profile(2)
Description
The detonation button for Sparkle in Honkai: Star Rail, with a simple and reliable structure, can be used as an external switch for computers.
Modeling: bilibili@粮亦丰
Requirement: Attribution is required for reprint or use, not for commercial use.
Installation instructions can be found in the internal structure diagram, no hardware is needed. Insert the pillar into the base first, then install the mushroom head, and finally insert the bottom tray.
The provided base can accommodate a small micro switch with a side length slightly less than 8.5mm. You can find it by searching for external computer switches on Taobao.
A 3D-printed spring is provided, but for long-term use, it's recommended to choose a metal spring with a diameter of 2cm and a height of 2.5cm.
This model is great for multi-color printing and uses four colors of filament: white, gold, purple, and red. Hand-painting is not ideal and can be tiring.
If the model has noise, wrap a strip of Teflon tape around the lower part of the column.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (11)