Fart House Films

cover

space needle print cover.png

DSCN0495_e42cb17c-1c83-46e2-aef3-7e164177d020.jpg

DSCN0499_e8cbeeb4-86f0-4113-8155-a6bba9f82b8b.jpg

DSCN0496_dabca201-8125-462c-a5e0-084b26a456f2.jpg

Combined_e4de16fa-d95b-4b90-b343-342e80b6699a.png

Base_9d14cb24-f75e-4dfd-bb7d-7119ca15d5a4.png

Top2_e3d8b51f-2850-4ff2-bb4f-6b83eb84b8a9.png

Top1_d7b6ce55-ef86-4ad6-842a-b8220e924ef6.png

Top1_w-support_8c6247fe-6db7-4df1-bbec-cf3b7610538b.png

Leg1_a84806cb-2653-4aea-9c86-fa966935e4d8.png

Leg2_18498151-f13f-4cab-9f3f-83e12ff9baa2.png

Leg3_8d529f50-28b7-427e-a5b0-fceafd6a67dc.png

Leg4_6beb4282-f8a2-406f-8d30-ca517a19e5c6.png

Print as one (Mini size)

plate_1.png

Print by parts (Mini size)

plate_2.png

Legs (Big size)

plate_3.png

Top (Big size)

plate_4.png

Base (Big size)

plate_5.png

Combined.png

PXL_20241027_231622777.jpg

This profile gives you print plate options for printing the mini version or the big version. Either option can be printed on plates as small as the A1 Mini! The Mini version is what's pictured.<ul><li>The “Print as one (Mini size)” print plate has tree supports enabled.&nbsp;</li><li>The other print plates (e.g. "Print by parts") have supports disabled.</li></ul>Instructions from <a target="_blank" rel="noopener noreferrer" href="https://www.thingiverse.com/thing:567695">original creator</a>:&nbsp;"This model prints without supports though you may want to use a raft for the tall slender pieces. You may need to glue the lower part of the top observation deck to the legs and the bottom part of the legs to the base. The rest of the pieces screw together so that they can be separated for transportation or replaced if broken.&nbsp;For best results printing the antennae in Top1.stl set fan power to 100% and use a minimum layer duration of 5 seconds."&nbsp;

Mini size + Big size

Seattle Space Needle

This model of the iconic Seattle Space Needle comes in a Mini size (~18cm tall) and a Big size (~40cm tall). All can print on an A1 Mini plate, too!<ul><li>Picture with the bobblehead = the Mini size. </li><li>Picture with the hand holding = the Big size.</li></ul><boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you like this model, please boost it. Thank you!</boostcontent></boostme>----------------------(original by <a target="_blank" href="https://www.thingiverse.com/Intentional3D" rel="nofollow noopener">Intentional3D</a>)

ASIA

Print Profile(1)

Description

Comment & Rating (18)

This remix is based on

License

Related Models