Mount Tapo C200, C210, C220 camera at a 45° angle. - Free 3D Print Model

Search models, users, collections, and posts

Hába97

Household>Office

IP Report

Print Profile(3)

All

P1P

P1S

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.16mm layer, 2 walls, 15% infill

Designer

1.2 h

1 plate

4.8(134)

0.16mm layer, 2 walls, 15% infill

1.5 h

1 plate

4.7(26)

Faster with better result - 0.2mm layer, 2 walls, 15% infill

57 min

1 plate

5.0(2)

Open in Bambu Studio

Boost

363

997

174

1.6 k

1.2 k

Released

Description

Boost Me (for free)

Help me grow!

Mount/stand for Tapo C200, C210, C220 camera at a 45° angle.

Comment & Rating (174)

@emilalexandrub

Print Profile

0.16mm layer, 2 walls, 15% infill

beautiful simple design but the mount doesn't snap in the camera, the camera is too loose. it can fall easily

@Kazsuki

amazing for the purpose, perfectly balanced and won't fall, but I'd put some weights just incase. however feel ill look for some sort of C clamp base to look onto a baby crib for future. +/- attaching this base.

The designer has replied

@Haba97

thanks for the photo and the insight. I drew it for exactly the same reason as you. for the children's room. We already have it in two rooms on the closet and there was no problem that it would fall off

@cpix

Print Profile

0.16mm layer, 2 walls, 15% infill

the only changes I'd made for the future: increase camera fixing to 1.5mm thicker, it is a tad loose. change the alignment for the camera fitting, offsetting it to insert in the camera with the alignment offset. if the camera is on perfect straight position,is not secured, so an offset should be made.

@VeRoNuMb

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

printed and fits perfectly. esun white PLA

@xarjo

Print Profile

0.16mm layer, 2 walls, 15% infill

It is quite stable when placing the camera, but the support blades should be a few millimeters longer, since when fitting the support into the camera, there is a little looseness, which is fixed by putting a little insulating tape on the blades

Show original

@Tag81

Print Profile

0.16mm layer, 2 walls, 15% infill

Perfect print, very easy support removal. printed with Elagoo PLA

@user_3723366226

Print Profile

0.16mm layer, 2 walls, 15% infill

great

@Panthere03

Print Profile

0.16mm layer, 2 walls, 15% infill

Superb print no defects and the camera holds easily

Show original

@Lupyn1806

Print Profile

0.16mm layer, 2 walls, 15% infill

fits great I just wish there was more tension on the connection But it fits and does what it's supposed to

Show original

@Patient_9

Print Profile

0.16mm layer, 2 walls, 15% infill

Let me start by saying I had absolutely no idea someone would create this for this specific brand! (I'm new to 3D printing.) Although my model is the Tapo C201 I took a chance and it fits perfectly! Plus, out of some of the other designs, I prefer this stand as it angles my camera whereas I don't have to wall-mount it. Thanks for creating and sharing!

(Edited)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.