Search models, users, collections, and posts

Bust of Roman Emperor Marcus Aurelius

Remixed by
Marco
Art>Sculptures
IP Report

Print Profile(2)

All
A1 mini
P1S
P1P
X1
X1 Carbon
X1E
A1
H2D
H2D Pro
H2S
P2S
H2C
X2D
A2L
0.2mm layer, 2 walls, 5% infill
0.2mm layer, 2 walls, 5% infill
Designer
3.8 h
1 plate
4.9(71)
0.6mm nozzle, 0.18mm layer, 2 walls, 5% infill
0.6mm nozzle, 0.18mm layer, 2 walls, 5% infill
3 h
1 plate
5.0(2)
Open in Bambu Studio
Boost
404
1105
124
114
1.4 k
942
Released 

Description

Model of the bust of the Stoic Roman emperor Marcus Aurelius, currently housed at The Metropolitan Museum of Art. Stands at about 15 cm tall and 10 cm wide. A perfect decorative piece that celebrates the enduring legacy of one of Rome's greatest emperors.

 

Remixed from the original 3D scan, with increased size and a new base for easier printing.

 

Thank you for your interest :)

marcus aurelius
stoic
bust
statue
roman
sculpture

Comment & Rating (124)

(0/1000)
@jackedupmedic
Boosted
The print profile is no longer public
Came out great! Sunlu Marble PLA
4
Reply
@Print3dlock
magnifique
0
Reply
@STLDad6
Print Profile
0.2mm layer, 2 walls, 5% infill
I love this bust. I always wanted it in my home and now I have it. going to print the larger one too. just started this on my mini
(Edited)
The profile uploader has replied
profile
3
Reply
@tmarco
Thank you for the review! I'm glad you enjoyed it. Would it be alright if I use your photos?
0
Reply
@STLDad6
Replying to @tmarco :
please use them. I’ll put some better ones up
(Edited)
profile
1
Reply
@Calminaion
Print Profile
0.2mm layer, 2 walls, 5% infill
I scaled it to be only 8cm, adjusted the layer height and I think it came out quite well. Great model!
The profile uploader has replied
profile
3
Reply
@tmarco
Came out really nice. Thank you for the review!
(Edited)
1
Reply
@user_4134340666
Seeing this in the slicer for any filament type. Any ideas?
0
Reply
@user_962977862
Try printing at 10% speed.
0
Reply
@user_4134340666
Replying to @user_962977862 :
Ran at 45mm/s the whole print. Silk PLA.
0
Reply
@noCRASH
Print Profile
0.6mm nozzle, 0.18mm layer, 2 walls, 5% infill
Great print profile for 0.6 nozzle, but needs some post processing in places where supports were.
The profile uploader has replied
0
Reply
@Fourier81
Boosted
Thanks for the feedback, appreciate it! 😊
0
Reply
@logan1984
Print Profile
0.6mm nozzle, 0.18mm layer, 2 walls, 5% infill
printed great!
0
Reply
@viajante3d
Print Profile
0.2mm layer, 2 walls, 5% infill
Perfect, I hope you keep designing
Show original
0
Reply
@user_3210018252
one of the supports broke off somehow midway through its printing, but it turned out fine in the end
0
Reply
@Ikka
Boosted
Print Profile
0.2mm layer, 2 walls, 5% infill
Lovely model, but I used different settings that are strangely not listed!? Thanks
Show original
0
Reply
@kwasiu
Boosted
The print profile is no longer public
nice
0
Reply

This remix is based on

Marcus Aurelius at The Metropolitan Museum of Art, New York
Marcus Aurelius at The Metropolitan Museum of Art, New York

License

This user content is licensed under a
Creative Commons Attribution-Noncommercial

Related Models

Flexi scorpion
Flexi scorpion
uni3Dworld
28.6 k
9.1 k
Display/Pedestal by Quickset45
Display/Pedestal by Quickset45
Sandholm
3.7 k
1.6 k
罗马斗兽场
Roman Colosseum
No Enter
5.5 k
2.8 k
Crown
Crown
mac93
8.6 k
2.1 k