Bender model - 50cm - Free 3D Print Model

Search models, users, collections, and posts

Pcanozo

Toys & Games>Characters

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.12mm layer, 4 walls, 10% infill

Designer

115.5 h

6 plates

4.8(4)

Open in Bambu Studio

Boost

248

511

314

Released

Description

Model of bender from futurama.

this is my first creation , so I'm open for advices.

The profile on the model is the same i used to create the model, it does work for me, but you may need to put it on your way.

I didn't glue all the parts in the pictures, so you can see the fitting between parts is quite good.

i did the body as it is in the file, but the bottom isnt straight , so will get some scaring from the supports. But you can cut the body where you want, and lay it down in the flat side and glue it. I personally prefer the way I've done.

I did spent around - 1.5kg to 1.7kg:

grey - 1.2kg

black white brown - around 500g

The whole project takes around 3 days to complete

Comment & Rating (11)

@tripiro

I have a problem with a plate of legs. This two pieces are only one object (sorry for my english)

The designer has replied

@Pcanozo

hi ! thanks for the enquiry. it is supposed to be one object. Becouse the legs are touching each other , I thought a extra cut would be unnecessary. but I've print it like that , and was fine. but if you are unsure , try and print only that object , and see how that works. thanks !

@tripiro

Replying to @Pcanozo :

ok ok, i try to print unified! thx

@jsadesigns.prin

Boosted

does the chest cavity open?

The designer has replied

@Pcanozo

hi ! no it does not. but i will make one, soon ish, with that feature. thanks

@user_841520641

Boosted

Print Profile

0.12mm layer, 4 walls, 10% infill

The profile uploader has replied

@Pcanozo

thanks for the feedback !

@Maria74

Boosted

Print Profile

0.12mm layer, 4 walls, 10% infill

The profile uploader has replied

@Pcanozo

thanks for the feedback !

@user_82941096

Print Profile

0.12mm layer, 4 walls, 10% infill

@zimmy18

Print Profile

0.12mm layer, 4 walls, 10% infill

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.