Search models, users, collections, and posts
Balatro Joker - Lusty Joker - Hueforge
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
1.2 h
1 plate
Open in Bambu Studio
Boost
42
109
26
14
189
149
Released
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 67.26x90mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Matte Scarlet Red Transmission Distance: 2
PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 3 unique filaments
Swap Instructions:
Start with Charcoal
At layer #11 (0.96mm) swap to Scarlet Red
At layer #18 (1.52mm) swap to Ivory White for the rest.
You may need to adjust the layer swap points if you use different filaments.
License
This user content is licensed under a
Creative Commons Attribution-Share Alike
Comment & Rating (26)