Titanic Light & Table lamp

2025.10.21 Update - Copyright Notice

Some friends have informed me that printed versions of this work are being sold on various platforms. First, I want to express my sincere gratitude to everyone who likes my model. In principle, I fully support individuals gaining value through creative endeavors. I also want to extend my deepest thanks to those who stood up for me and brought this to my attention. Your commitment to protecting creation is the most valuable light in this community

However, after careful consideration, I have made the following decision

Effective immediately, I permanently and freely permit anyone to 3D print this model and sell its physical finished products (! limited to the model on this page!)

! The only condition! : You must add the following "Source Statement" in a prominent location on your "Product Description" or "Product Page"

1. [Creator Attribution]:
Model design/modification originated from: 翻滚吧咸鱼RIF
2. [Model Homepage Link]:
Official model homepage: (Web link of this model)
3. [Model Homepage Screenshot]:
A complete screenshot of the model homepage, clearly showing this account's avatar, ID, model title, and main model image, must be attached

For any merchants who continue to sell this model without including the "Source Statement", I reserve the right to pursue any legal recourse

Thank you again for your support. Let's have more fun together. Thank you, everyone

____________________________________________________________________________________

Updated 14 October 2024——Titanic for LED Strip Light Components

Attention: This components must be used for this 3mf doc:Titanic for LED Strip Light Components

The easiest way is to buy electrical parts designed specifically for a ring light, Provides easy installationwithout the need for soldering.
It is available on Amazon
(Dimmer version)

Cold light 6500K

https://www.amazon.com/dp/B0D9LBCWGB?maas=maas_adg_5B152486A17E3D53C41D3E2D38079FC8_afap_abs&ref_=aa_maas&tag=maas

Warm light 3000K

https://www.amazon.com/dp/B0DJGPGCJ5?maas=maas_adg_1A6D630B9B2BA40A088023B11E5FF3E4_afap_abs&ref_=aa_maas&tag=maas

Better visual effects With  LED Strip Light Components: 

· More even light distribution.

· More freedom to adjust the light level.

· Concealed light strips to avoid looking directly into the light.

Let's see how well it works!

Finally, let's look at how to install it:

————————————————————————————————————————————————————————————————

June 24, 2024 Update

The model has been updated to fit the Bambu 001 mystery box kit, eliminating the need to purchase additional parts. You can find it here

https://makerworld.com/en/models/508941#profileId-424881

The model has been updated to fit the Bambu LED Lamp Kit 001 without the need to purchase additional parts. Can be moved:

https://makerworld.com/en/models/508941#profileId-424881

——————————————————————————————————————————

Thanks to the open-source Titanic model

I used this as a basis to design a Titanic-themed night light

If you purchase according to my accessory list, you can enjoy the following highlights

Type-C charging, a large 2500mAh battery, a metal touch switch, and three light brightness levels (if printed with white filament, the brightest setting is sufficient for reading)

Once connected this way, glue the battery and the modules together with 502 glue. Ensure the touch switch is precisely aligned; this step may require a little patience

————————————————————————————————————————

Thanks to the open source Titanic model, as the basis for the design of the Titanic-themed night light

If you buy it according to my accessory list, you can have the following highlights:

Type-C charging, large 2500mah battery, metal touch switch, three levels of light adjustment (the brightest level is enough for reading if you're printing on white material)

Once assembled in this way, glue the battery position and a few modules together with 502 glue. Note that the touch switch must be aligned, this step may require a little patience.

——————————————————————————

Purchase List

1. Desk lamp circuit board: https://m.tb.cn/h.gVYgWp6VCGw9pUQ?tk=dwTnWx881bj
2. LED light panel: 6cm, 1W, 3.7V (Choose colors according to your preference) https://m.tb.cn/h.g4OcrZnyzKxapx6?tk=4UVJWx8jzcK
3. Metal touch button (10mm): Copper mirror decorative cap purchased, cheap and aesthetically pleasing. As long as the size is appropriate, you can also select a suitable metal cap yourself. https://m.tb.cn/h.gVQlNaaHyImEHz4?tk=4oHqWx8kRmo or https://m.tb.cn/h.gVES9qCIsrDUQHn?tk=Z71SWx8kyHc
4. Several black, red, and white wires
5. 502 super glue
6. m2*8 self-tapping screws: 4 pieces, for fixing the circuit board and LED light panel https://m.tb.cn/h.gVEQ5fXsmNGEp9d?tk=tAbgWx8ovXC
7. Battery: 3.7V polymer lithium battery 50*50*6.5mm 2500mAh https://m.tb.cn/h.gVE97jLDgZx7AIM?tk=YVHzWx8p91y

Purchase links are for reference only

Purchase List

1.Circuit board:
https://m.tb.cn/h.gVYgWp6VCGw9pUQ?tk=dwTnWx881bj
2.LED light：6cm，1W，3.7V（Colors according to preference）
https://m.tb.cn/h.g4OcrZnyzKxapx6?tk=4UVJWx8jzcK
3.Metal touch button (10mm) : bought copper mirror decorative cover, cheap and good-looking, as long as the size is appropriate, you can also choose the right metal cap.
https://m.tb.cn/h.gVQlNaaHyImEHz4?tk=4oHqWx8kRmo 
or
https://m.tb.cn/h.gVES9qCIsrDUQHn?tk=Z71SWx8kyHc
4.Number of wires
5.502 Super glue
6.m2*8 self-tapping screws: 4 for fixing circuit boards and LED lightshttps://m.tb.cn/h.gVEQ5fXsmNGEp9d?tk=tAbgWx8ovXC
7.Battery: 3.7V polymer lithium battery 50*50*6.5mm 2500mAh https://m.tb.cn/h.gVE97jLDgZx7AIM?tk=YVHzWx8p91y

Purchase link for reference only