Search models, users, collections, and posts
Hueforge Edward elric with cape of Fullmetal
Print Profile(1)
0.08mm layer, 1 walls, 100% infill
Designer
2 h
1 plate
Open in Bambu Studio
Boost
50
139
15
8
102
69
Released
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 141.87x200mm in size
You may print at higher layer heights below the Min Depth of 0.16mm
The Max Depth is 1.5mm and the Actual Depth is 1.5mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA Smartfill Recycled White Transmission Distance: 4
PLA PolyTerra Army Red Transmission Distance: 0.3
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #2 (0.24mm) swap to White
At layer #9 (0.8mm) swap to Army Red for the rest.
License
This user content is licensed under a
Creative Commons Public Domain
Comment & Rating (15)