"Red Blossom" - Bookmarks Set - Free 3D Print Model

Search models, users, collections, and posts

C3D

Art>2D Art

IP Report

Print Profile(4)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

A1 mini

AMS, 0.08mm layer, 2 walls, 100% infill

Designer

3.4 h

1 plate

4.9(482)

A1MINI, 0.08mm layer, 2 walls, 100% infill

Designer

3.6 h

1 plate

4.9(109)

NO AMS, A1MINI, 0.08mm layer, 2 walls, 100% infill

Designer

3.5 h

1 plate

4.9(16)

NO AMS, 0.08mm layer, 2 walls, 100% infill

Designer

3.4 h

1 plate

4.8(10)

Open in Bambu Studio

Boost

4091

10507

713

520

8.4 k

4.8 k

Released

Description

If you want to sell prints of this model, as well as all of my models - future and past
Subscribe to My Patreon:

Or Subscribe for a commercial License Directly in Maker World:

Membership

C3D Commercial Membership - Authorized Merchant

Join

ALSO CHECK OUT THE NEW Red Blossom: Version 2! 🌸✨

A beautiful set of bookmars with a different pictures of a red blossom

The full set is to be printer together. It's designed in such a way which makes this possible with the color changes.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
For folks without AMS:
Filaments Used:
PLA Kingroon Black Transmission Distance: 0.4
PLA KINGROON WHITE Transmission Distance: 5.5
PLA KINGROON Red Transmission Distance: 4

Swap Instructions:
    Start with Black
    At layer #7 (0.64mm) swap to WHITE
    At layer #14 (1.2mm) swap to Red for the rest.

If you like my work, drop me a follow!🤜🤛

Comment & Rating (713)

@user_4174521058

Just printed one for my wife and added a little glow. looks awesome.

@draconianprints

Boosted

Got it to turn out pretty finally. 😁 I love it.

(Edited)

The designer has replied

@zhakryuu

Seems like you had some issues with the machine here. Make sure you map the ams slots well and to not change anything in the premade profiles

@draconianprints

Boosted

Replying to @zhakryuu :

I got it to print correctly this time. 🤣

@user_3557884769

Boosted

Great design. Wish they could be separated so that I can test print with 0.2mm nozzle one by one. A whole set at 0.2mm is expected to finished in >8hrs

The designer has replied

@zhakryuu

You can use the cut tool to separate them, just dont repair when the slicer asks.

@pathfinder_

Print Profile

AMS, 0.08mm layer, 2 walls, 100% infill

printed nicely but there is some imperfections on one of the for

The profile uploader has replied

@zhakryuu

It seems like the edge lifted up. I suggest cleaning the build plate and maybe increasing the temperature by 5c (for the bed) it nothing helps try 3D lac or hair spay if thats unaccessible for you

(Edited)

@pathfinder_

Replying to @zhakryuu :

this is because i couldnt get it completely Off. the Plate was cleaned before with Alkohol and left to dry. but it seamed that the black part of the model was Not fully printed on this Corner. migt be a printer issue tho. Other Print went fine with Same settings and there wasn't this Error.

(Edited)

@zhakryuu

Replying to @pathfinder_ :

Considering the model is quite popular and I don't see people having this issue its probably a printer/filament issue. I would appreciate if you dont reflect that in the rating though. Its a bit unfair to rate a model lower unless there is something wrong with the actual model/profile.

(Edited)

@user_1757725681

Boosted

Print Profile

AMS, 0.08mm layer, 2 walls, 100% infill

Soooo many complements on these. A friend immediately got off with the first set, my interstate sister has put dibs on a set, and then I had to make another set for me.

@Platin

Boosted

Print Profile

AMS, 0.08mm layer, 2 walls, 100% infill

Filaments used: - Bambu Lab PLA Matte Charcoal - Bambu Lab PLA Matte Ivory White - Bambu Lab PLA Basic Red

@TuTaller3D

Print Profile

AMS, 0.08mm layer, 2 walls, 100% infill

un gran diseño, son unos marcapaginas muy bonitos!!

@user_4028035238

What characters are those?

Show original

@Steady_Stare

not bad. the detail isn't quite as sharp as it looks in the pictures but overall good design.

The designer has replied

@zhakryuu

Your printer is mashing the layers, that is why there is a loss of details. I suggest doing some maintenance and correcting this before printing such delicate models. Check Bambu wiki, A1's are notorious for this when the nozzle holder gets loose over time.

(Edited)

@Steady_Stare

interesting. I'll take a look. I've got a P2S and I've only been printing for a few months. thanks for the tip.

@user_4128455854

Boosted

Print Profile

AMS, 0.08mm layer, 2 walls, 100% infill

Nice design printed perfect with 0.2 nozzle. On my A1 had to 50% slow the print because extruder was clicking like skipping just saying for others with 0.2 nozzle.

The profile uploader has replied

@zhakryuu

That can happened on a 0.2 nozzles especially on seasoned extruders. For example I dont get it on my newest machines. Cleaning the extruder well and making sure everything is tight should help!

@TuTaller3D

A great design, they are very beautiful!!

Show original

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.