LiveFastEatTrash
Print Profile(1)
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size. X and Y can be adjusted buy Z must remain the same.
You may print at higher layer heights below the Min Depth of 0.48mm
Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 2.5
PLA BambuLab Basic Gray Transmission Distance: 3
PLA BambuLab Basic White Transmission Distance: 6
This print uses 4 unique filaments. Substitute as you see fit.
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Gray
At layer #14 (1.2mm) swap to Gray
At layer #21 (1.76mm) swap to White for the rest.
Boost Me (for free)
Got a Boost to spare? Every little bit helps the motivation. Thank you!
Membership
Want to go commercial or maybe just show some love? Consider signing up to show support!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)