EZ-Z Luber - The EaZy way to lubricate the Z-axis

The EZ-Z Luber is an EaZy way to lubricate the Z-axis screw of your printer. This handy tool screws onto the end of a Super Lube tube, allowing for precise and clean application without getting grease on your hands.

To use, simply replace the cap on the Super Lube tube with the EZ-Z Luber. Straddle the sides of each Z-axis screw with the applicator and turn it clockwise. The EZ-Z Luber hugs the screw, and when you squeeze the tube, lubricant is applied directly to all sides of the screw simultaneously. Move it up and down along the screw to cover the entire length. You’ll be finished in no time.

There are several versions of the EZ-Z Luber available:

• Luber with feet (3 oz Super Lube) : This version includes feet, allowing it to stand up on its own when not being used.
• Luber with trimmed down applicator (3 oz Super Lube ): Designed to fit the narrow access of the A1 Series of printers. 
• Luber with hook applicator (3 oz Super Lube): A smaller, hook-shaped version designed to fit better in tight spaces.
• Luber with feet (8 oz Super Lube): Designed to fit the 8 oz Super Lube container.

Happy Printing!

Also available is a dust and dirt cap that fits the EZ-Z Luber.

Update

April 3rd, 2025 - Added a special long necked nozzle that can reach the rear z-axis of the H2D series of printers. 

July 1st, 2025 - Added a long necked nozzle that can reach the rear z-axis of the H2D series of printers AND connects to the 8 oz Super Lube container.