Search models, users, collections, and posts
Print Profile(1)
0.2mm layer, 4 walls, 15% infill
Designer
11.4 h
7 plates
Open in Bambu Studio
Boost
139
346
14
7
228
55
Released
Description
As I got few requests for a same size Display Case but for thicker (2mm) Acrylic/Glass sheets, I have done this Remix.
Changes done from original model are:
- Window groves for thicker (2mm) glass
- Base now is 4mm wider. Change needed to fit 2mm glass
- Upgraded Windowed top Lid.
Acrylic or Glass for windows to be used are 5x7in (12.7mm x 17.78mm) x2mm
Like those ones on Amazon
Part List:
- Solid Base (Optional)
- Hollowed Base (optional)
- Corner Pillar - need to print 4 of them
- Top Support Bracket
- Solid Top Lid (Optional)
- Windowed Top Lid - Top Part (Optional)
- Windowed Top Lid - Bottom Part (Optional)
- Acrylic or Glass sheet 12.7mm x 17.78mm x 2mm. 4 sheets per Display case
- If You are going to use a Windowed Top Lid then you will need to cut one Acrylic sheet (or get one) to the size 12.7mm x 12.7mm x 2mm
All the Assembly is the same as You can find on Original Model's description.
You can Buy me a coffee if You want to support me in my work here :)
https://www.buymeacoffee.com/warlogh
(And very Big Thank You For interest in my work)
Comment & Rating (14)