Pwnagotchi Case PiSugar3 Slim - V2 - Free 3D Print Model

Search models, users, collections, and posts

Dog

Hobby & DIY>Electronics

IP Report

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

1.5 h

1 plate

4.7(7)

V2 - 0.2mm layer, 2 walls, 15% infill

Designer

2.4 h

1 plate

4.6(5)

Open in Bambu Studio

Boost

131

343

241

Released

Description

This model is build from the ground up to house a slimagotchi with PiSugar3 battery and Waveshare V4 screen.

All ports and the two buttons of the PiSugar are accessable. The back of the case has a locking dovetail joint.

It was modeled to be printed without supports using overhangs. If you want cleaner surfaces around the ports, feel free to add supports yourself.

UPDATE Feb/2025

Thanks for the feedback. I have added more space around the ports. There is now one small support piece built into the model that should be removed (see picture). I also made the buttons taller to they are a little easier to press. Additionally i added a second version with 5.5mm extra space between the raspi and screen. This could allow a non-modified pwnagotchi to be fitted but please measure your device to ensure it will fit. Thanks!

Comment & Rating (22)

@martinezrx7

i have a rasp w zero 2 with waveshare v4 and pisugar battery. ports dont line up and battery sticks out. could you modify it to fit. i really like your case.