Gulfstream G600 Hueforge 4 color

Gulfstream G600 Hueforge 4 color print. I went Bambu matte filaments in Black, Blue, Grey, and White as it just made it cool and added depth.

Project: G600.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

The Model is 200x133.33mm in size
You may print at higher layer heights below the Min Depth of 0.32mm
The Max Depth is 2.1mm and the Actual Depth is 2mm

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Matte Marine Blue Transmission Distance: 0.5
PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 4 unique filaments

Swap Instructions:
Start with Charcoal
At layer #5 (0.56mm) swap to Marine Blue
At layer #9 (0.88mm) swap to Ash Gray
At layer #14 (1.28mm) swap to Ivory White for the rest.