Shoji Pedestal Stand Lamp
Print Profile(2)
Description
Pedestal style Japanese Shoji style lamp.
Shade measures 180 mm height x ~140 Width
The shade has ribs embossed on the inside to create the ribbed effect once the bulb is lit
Lamp with walls, base and top: 305 mm height by 140mm width
Print 1 each of the base, the shade holder, the shade and the top.
Melt 4 x M3 Inserts into the base to attach the shade holder cover with 4 - M3 x 6mm screws and then melt 4 inserts into the shade holder upper arms to attach the top with 4 more M3 x 6mm screws
No supports required.
The fassung-lamp socket ( e14-28 mm):
https://www.amazon.de/dp/B097K4YNL9
The electrical cable and switch:
https://www.amazon.de/dp/B002DAOX58
The E14 Bulb used here: (90 lms)
https://www.amazon.de/dp/B0B5MPL9MX
8 x M3 by 6 mm Screws
https://de.aliexpress.com/item/32443118299.html?
8 x M3 Inserts
https://www.amazon.de/dp/B08BCRZZS3?
The slicer settings for the base, shade holder, and top and e14 short neck:
.20 mm Standard
(All standard settings and speeds, Aligned seam settings)
Filament: Eryone Matte PLA+ Black
The slicer settings for The Shade:
Filament: Sunlu PLA+ Whte
(Optional) .. I added the stripes using an AMS and Sunlu Silk Silver PLA
.20 mm Strength and Flow rated Generic PLAs
Infill % - 100 , Rectangular
Wall Loops - 8
Top Shell - 5
Bottom Shell - 8
Seam Position- Aligned
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)