Nissan Logo

Search models, users, collections, and posts

e.bondarenko

Hobby & DIY>Vehicles

IP Report

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.6mm nozzle, 0.08mm layer, 2 walls, 15% infill

Designer

1.4 h

1 plate

4.4(9)

0.4mm Nozzle ,0.08mm layer, 2 walls, 15% infill

Designer

1.4 h

1 plate

5.0(1)

Open in Bambu Studio

Boost

135

246

741

202

Released

Description

I was unable to find to find a dissent model of Nissan Logo so I made one.
I've copied the original Logo to the best of my abilities and found the correct font for it.

Feel free to remix as you like :)

Comment & Rating (18)

@user_1249242748

Boosted

Scaled up and printed with AMOLEN silk PLA and it came out fricken awesome as a temporary bumper badge! I have the real one to put on at a later time, but plan on painting the car in the next year. Great model, thank you!! Need to get a better up close pic but from 5’ you can’t even tell it’s printed.

@loki32687

What scaling did you do? I want to print one for my buddies 370 for him

@user_1249242748

Boosted

Replying to @loki32687 :

I can’t remember the exact scaling that I used, but how I did it was by first printing this model at regular scaling, measuring OD of the printed part and a rough OD of what the badge should be to fit in the bumper cavity. Then divide big OD by little OD and that’s your scaling factor. If you don’t have a cavity to measure, let me know and I’ll grab the OD of the final badge.

@loki32687

Replying to @user_1249242748 :

Yeah I don't have the car so, so I can't take any measurements unfortunately

@user_2436877172

Boosted

would love this in .4 extruder

The designer has replied

@e.bondarenko

There you go :)

@swthompson71

Print Profile

0.6mm nozzle, 0.08mm layer, 2 walls, 15% infill

printed these out for my son's 370z. adjusted to fit and sprayed with clear coat. looks great. thank you

@craigrudd

Print Profile

0.6mm nozzle, 0.08mm layer, 2 walls, 15% infill

I used a silk filament and it broke when taking off the bed. i found where the outer ring attaches to the logo area to thin.

@falape

Boosted

Great design man, make a remix keychain from it

@cruz.brunos87

Print Profile

0.6mm nozzle, 0.08mm layer, 2 walls, 15% infill

just add to make a hole on top off it, so i could use the chain and let the letters down

@GWP_CHIEF

Print Profile

0.6mm nozzle, 0.08mm layer, 2 walls, 15% infill

@3dprintversesa

Print Profile

0.6mm nozzle, 0.08mm layer, 2 walls, 15% infill

@user_1503606340

Print Profile

0.6mm nozzle, 0.08mm layer, 2 walls, 15% infill

@printski3d

Print Profile

0.6mm nozzle, 0.08mm layer, 2 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.