Space Sphynx
Print Profile(1)
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size. You can adjust the X and Y but the Z must remain the same.
You may print at higher layer heights below the Min Depth of 0.48mm
Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.3
PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
PLA BambuLab Basic Purple Transmission Distance: 2.6
PLA BambuLab Basic Green Transmission Distance: 2
PLA BambuLab Matte Marine Blue Transmission Distance: 0.5
PLA BambuLab Matte Mandarin Orange Transmission Distance: 3
PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
This print uses 7 unique filaments. Substitute to suit your needs.
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Ash Gray
At layer #9 (0.8mm) swap to Purple
At layer #12 (1.04mm) swap to BambuLab Green
At layer #15 (1.28mm) swap to Marine Blue
At layer #21 (1.76mm) swap to Mandarin Orange
At layer #25 (2.08mm) swap to Ice Blue for the rest.
Boost Me (for free)
Got a Boost to spare? Every little bit helps the motivation. Thank you!
Membership
Want to go commercial or maybe just show some love? Consider signing up to show support!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)