AR-15 Gas Block Jig Fixture Tool
Print Profile(1)
Description
Membership
If you are interested in printing these to sell, please join my Commercial License. Thank you!
Boost Me (for free)
Please consider Boosting this greatly helps offset the material cost to make these for folks.
This is a simple jig to help install the roll pin to connect the gas tube to the gas block. It was designed for a 0.75 barrel low profile gas block (Specifically and Aero Precision). There is a left and right version of the fixture depending on which way it might be easier to start the press in (Look at the gas block to see if there is a lead in). There is also a support fixture to help hold the gas tube. I made mine out of PETG to make it tough, but PLA would probably work fine.
My other gunsmithing designs can be found here:
https://makerworld.com/en/collections/1273204-ar-15-gunsmithing
Boost Me (for free)
Please Consider Boosting
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (102)