Y Splitter M6 for A1 - External spool - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

SammyK

3D Printer>3D Printer Accessories

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.16mm layer, 3 walls, 20% infill

Designer

1.2 h

1 plate

4.7(42)

0.16mm layer, 3 walls, 20% infill

Designer

1.2 h

1 plate

4.5(14)

Open in Bambu Studio

Boost

151

407

476

388

Released

Description

Hello, this is my remixed version of the good Y splitter modified by MarcoDT; the main difference is that I fixed the overall mesh, smoothed it, adde holes to host M6 PTFE tube connectors and also fixed the geometry in one internal part where filament passess through, as it was not so good and had an enlargment where filament stucked when pushed in the splitter.

Just print this tool on your printer, apply metal connectors and it is done; 0.16 layer height is ok, supports are enough to support overhangs in the bottom. Note: It is eventually required to sligtly drill the head of the bottom metal PTFE connector before applying it (as I didi and highlighted in the photo with white pen) just to make the filament passage much more “fluid”.

I suggest to connect the “external spool” PTFE tube in the straigh connector and the one from AMS in the other one as shown in the pic. It is little big but not too much and has the clip to stay in place with other AMS PTFE tubes. Enjoy!

Required: 3x M6 fittings for PTFE Tube (as shown in the photo)

external spool splitter

ams splitter

Comment & Rating (67)

@user_1716640567

Print Profile

0.16mm layer, 3 walls, 20% infill

Works well for both my A1 mini and my A1

@Nescent

why would you put the splitter so close to the ams instead of close to the printhead? you have to completly unload your ams spool to load in your external spool.

(Edited)

@user_1716640567

Replying to @Nescent :

Now that you mention it my choice of location is not as wise as it first seamed. Of course you have spoiled all of the fun/frustration I was going to have working that out for myself. Thankyou :).

(Edited)

@R.V.Ferreira

Boosted

just perfect… working with AMS Lite and the WisePro filament feeder.

@DJTILT

Print Profile

0.16mm layer, 3 walls, 20% infill

works well

@bamlabA1

Print Profile

0.16mm layer, 3 walls, 20% infill

Initially experienced slight difficulties with filament feeding

Show original

@BoredCreative

Print Profile

0.16mm layer, 3 walls, 20% infill

I haven't tried it, but it sure looks like it will work.

@ShIfTy492

Print Profile

0.16mm layer, 3 walls, 20% infill

Printed Perfect

@CORRADOV9

Print Profile

0.16mm layer, 3 walls, 20% infill

good

@Starfleet59

question. where can i find and order the Required: 3x M6 fittings for PTFE Tube (as shown in the photo) ? i saw this one on Alixpress ?? many thanks Rob

(Edited)