Mayhem_940

cover

IMG_3536_a8b68053-88e1-4534-9d2d-5be8a754d64f.jpg

plate_1.png

IMG_3536_a8b68053-88e1-4534-9d2d-5be8a754d64f.webp

Clutch Figit Toy_e6f813c9-83d1-4659-9e5d-5b3a8ffc2ea3.webp

Prints all on one plate.&nbsp;Supports aren't needed, but a brim is placed on the smaller parts to help with adhesions.&nbsp;Its best to assemble it with the shaft and joint together first, and the spring and base together.&nbsp;Then put the joint in the supports and work them into the base.&nbsp;&nbsp;The spring has a very tight fit with the base, so i suggest testing the fit on the outside of the base (the bottom) before attempting to put it inside the base. You may need to sand down one side of the spring to that it'll fit easier.&nbsp;

0.2mm layer, 2 walls, 15% infill

This is a clutch figet toy with a spring so that there is some resistance when gowing between “gears”

Print Profile(1)

Description

Comment & Rating (41)

License

Related Models

Clutch Figet Toy

Print Profile(1)

Description

Comment & Rating (41)

License

Related Models