Search models, users, collections, and posts
Jorogumo, japanese demon hueforge 200x200
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
6.6 h
1 plate
Open in Bambu Studio
Boost
14
16
2
2
6
2
Released
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA smartfil negro Transmission Distance: 0.4
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA smatfil White Transmission Distance: 6
This print uses 4 unique filaments
Swap Instructions:
Start with negro
At layer #12 (1.04mm) swap to Red
At layer #16 (1.36mm) swap to Yellow
At layer #18 (1.52mm) swap to White for the rest.
License
This user content is licensed under a
Creative Commons Attribution
Comment & Rating (2)