Virpil WarBRD(D) Rig Base Plate - Free 3D Print Model

Search models, users, collections, and posts

RdyPlay3erOne

Hobby & DIY>Other Hobby & DIY

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.16mm layer, 3 walls, 15% infill

Designer

2.1 h

1 plate

4.3(4)

Open in Bambu Studio

Boost

Released

Description

Hier gibt es mal meine Baseplates für meine Virpil WarBRD-D. Diese passen natürlich auch für die alte Generation.

Die Montage erfolgt auf einem 4080 Profil.

Gedruckt mit PLA-CF

0,16 Layer
Standard Support für die Schraubenlöcher.

Zur Montage werden 4x M4x16/20 Schrauben benötigt.
Dazu passende M8 Schrauben für euer RIG. Bei mir waren es M8x12

Here are my baseplates for my Virpil WarBRD-D. Of course, these also fit the old generation.

They are mounted on a 4080 profile.

Printed with PLA-CF

0,16 layer
Standard support for the screw holes.

4x M4x16/20 screws are required for mounting.
Matching M8 screws for your RIG. For me it was M8x12

Comment & Rating (9)

@3DP0

Print Profile

0.16mm layer, 3 walls, 15% infill

This is not as useful as I had hoped. I'd have much preferred a side mounting version of this. For the current version, risers should be included at different heights to allow this to be mounted above any floor plates or other obstructions in a sim cockpit.

The profile uploader has replied

@RdyPlay3erOne

My apologies for creating a baseplate tailored to my needs rather than yours :) This is simply an adapter plate for easy assembly, precisely as described in the text However, the plate's height can be easily adjusted using the scaling function in your slicer

(Edited)

Show original

@Meise01

Exactly what I wanted to design myself! Does the plate fit the Monstertech aluminum profiles? I'm designing an adapter plate for the Virpil Cdt Throttle onto Monstertech profiles. Thank you for the file

Show original

@3DP0

Replying to @Meise01 :

This plate fits perfectly into a 4040 profile, I'm not sure about Monstertech, but if it's also a 4040 profile, it should be the same If you end up designing in a different orientation, let me know I'd be happy to print and test it

Show original

@anand.sunier

Print Profile

0.16mm layer, 3 walls, 15% infill

maybe a version with anothe bolt at the other end for more regidity. It flexes a bit with the bolts on one end.

The profile uploader has replied

@RdyPlay3erOne

My print bed extends beyond the end However, I can gladly add another one What material did you print with

Show original

@DeltaCharlie

Any chance you could make a vesion with Extrusions mounting holes with 1" spacing? So it can be used on 1020 Aluminum Extrusions. Or maybe post the CAD file?