Himbeeren Lampion (Rasberry lantern)

Hello, I recently discovered these 70mm lamp inserts on Amazon:

https://www.amazon.de/ULEMONDEE-Solarleuchten-Einmachglas-Solarmodul-Gartenleuchten/dp/B0BZHFK8PS/ref=pd_ci_mcx_pspc_dp_d_2_t_2?pd_rd_w=AOIrD&content-id=amzn1.sym.7838253a-f0cb-4765-8290-3a5e015d7ac1&pf_rd_p=7838253a-f0cb-4765-8290-3a5e015d7ac1&pf_rd_r=H8Z3GA3Z26ZZEHJSDPDP&pd_rd_wg=6P7fN&pd_rd_r=0bc3162c-5dc4-4315-a818-e9683e7bd502&pd_rd_i=B0BZHFK8PS&th=1

It turns out there are two different sizes of inserts (80,70mm and 70,60mm) If you happen to have the smaller ones… no problem @Thanadus was kind enough to design a suitable adapter so that the smaller lamp inserts can also be used https://makerworld.com/de/models/762576?from=search#profileId-697421

This gave me the idea to redesign my vases into lanterns The result is truly superb, however, the lanterns work best with bright filaments and as few wall lines as possible Ideally, the spiral vase mode would be best suited, but then the lid with the opening for the inserts would not be possible and the lantern could not be closed at the bottom Ultimately, I used the “height range modifier” in Bambu Studio to set the wall thickness in the side area to “1” and set the infill there to “0” You also need to ensure that the insert receptacle is recessed, so be sure to plan supports there!! In total, about 72 grams of filament are used for the lantern I will also transform more of my vases into lanterns because I would like to have a few different lanterns in the garden, so feel free to check back here more often ;)

Have fun printing!!