Wall Clock / Wanduhr für Uhrenkomponenten-Kit 011

https://makerworld.com/en/collections/4639439-licensed-models

You may sell this model, and all models in the above link,
with a Patreon membership
www.patreon.com/cP_3D

I endeavoured to craft a clock face for the Clock Component Kit 011 (including hands and wall mount), perhaps someone will find joy in reproducing it

I utilised a radio clock movement from Amazon, dimensionally congruent with Bambulab's Kit 011

https://www.amazon.de/dp/B00TOBU9B6?ref=ppx_yo2ov_dt_b_product_details&th=1

To utilise the dial as an STL file for printing, ensure you expand the central aperture to 8mm in your slicer, as scaling necessitates this adjustment For 3MF users… scaling should be unproblematic 😉

I've incorporated a new print profile featuring a set of novel clock hands The second hand presents a significant printing challenge I recommend using this profile

Should you require differently sized hands, please contact me I will adjust them accordingly and establish a new profile (different clock movements possess varying hand-holder diameters)

Clock hands for other quartz clock movements are available here:

https://makerworld.com/en/models/540231#profileId-457599

My other dials are collated here

https://makerworld.com/en/collections/1715414

 

I once attempted creating a clock face for the Clock Component Kit 011 (including hands and wall mount); perhaps someone will enjoy reprinting it

I employed a radio clock movement from Amazon, dimensionally identical to Bambulab's Kit 011

https://www.amazon.de/dp/B00TOBU9B6?ref=ppx_yo2ov_dt_b_product_details&th=1

Those utilising the dial as an STL file for printing should note the need to enlarge the central hole to 8mm in their slicer, a consequence of scaling For 3MF users… scaling is likely straightforward 😉

I've included a new print profile with a set of new clock hands The second hand proves particularly challenging to print; I recommend using this profile

If alternative hand sizes are needed, please contact me; adjustments will be made and a new profile created (other clock mechanisms have different hand-holder diameters)

Here is an image of the new hands:

The following models are available here: