Battery Storage (CR1225 & 1220) 10x

This a coin cell battery holder for CR1225 and CR1220 coin cell batteries. You can place up to 8 or 10 coin cell batteries (both models available). Very simple assembly, just put a drop of glue in the recess in the cap and push the inner part in there. You're done!

See my other coin cell battery storage sizes:

• CR2032, CR2025 and CR2016: https://makerworld.com/en/models/469405#profileId-399802
• CR2450: https://makerworld.com/en/models/474301#profileId-384707
• LR44 and SR44: https://makerworld.com/en/models/1979438-battery-storage-lr44-sr44-hold-up-to-10x#profileId-2129153
• CR1632, CR1625 and CR1620: https://makerworld.com/en/models/469405-battery-storage-cr2032-cr2025-cr2016-8x-10x#profileId-516569

Notes:                     

Print at 0.12 mm layers because this thing is pretty small. I tried 0.2 mm but the threads were not super good.

One you've printed all three parts, just put a drop (or two) of glue to hold the cap to the inner cylinder and you're good to go.