Customizable 3D Printing Suggestion Box

3D Printable Suggestion Box

Introducing a stylish and functional 3D printable suggestion box, perfect for gathering ideas, feedback, and suggestions from family and friends. This elegant box is designed to seamlessly blend into any home or office decor, encouraging everyone to share their thoughts and opinions easily.

Features:

Modern Design: The box features a sleek, contemporary design with rounded edges and a minimalistic aesthetic, making it a visually appealing addition to any room.

Side Slot for Pens and Notepads: The box includes a convenient side slot designed to hold pens and small notepads, ensuring that everything needed to jot down suggestions is always within reach.

Easy Assembly: Designed for straightforward 3D printing, the box consists of two main parts – the main container and the lid – which can be easily assembled using just two M2 screws and four M6x3 magnets.

Secure Lid: The lid is designed to magnetically snap on top of the box, ensuring that all suggestions remain private and secure. It also includes a slit on the top, wide enough to accommodate various sizes of paper or cards.

Customizable Nametag: The box features a customizable nametag slot on the front, allowing you to personalize it with names, messages, or decorative patterns. Add your family’s name or an inside joke to give it a personal touch.

Compact Size: The box is designed to be compact yet spacious enough to hold numerous suggestions. Its dimensions are approximately W-140mm/L-120mm/H-122mm, making it easy to place on a desk, countertop, or shelf.

Print Settings:

• Layer Height: 0.2mm
• Infill: 15% Adaptive Cubic
• Supports: Only required for the small nameplate overhang
• Filament Material: PLA, PETG, ABS, etc.

Required Hardware:

• (2) M2 x 8mm Screws
• (4) M6 x 2mm Magnets

Assembly Instructions:

1. Print all parts (main container, lid, hinge, and nametag) using the recommended settings
2. Allow the printed parts to cool and remove any excess filament if necessary
3. Fit the first two magnets into the lid (glue may be required)
4. Fit the second two magnets into the main container (glue may be required)
5. Fit the lid securely onto the main container, aligning the holes for the hinge pin
6. Insert the hinge pin until it is protruding equally on both sides
7. Slide hinge spacers on each side of the hinge pin
8. Insert and tighten two M2 screws to secure the lid in place
9. Insert the customizable nametag into the designated slot on the front of the box
10. Place the suggestion box in a convenient location where family and friends can easily access it

Encourage open communication and creativity with this beautifully designed 3D printable suggestion box. Perfect for family gatherings, parties, or everyday use, it’s an ideal way to keep the lines of communication open and gather valuable input from your loved ones.

Powered by MakerWorld-Make My Sign (https://makerworld.com/makerlab/makeMySign)