Starlink gen3 Pole Mount

This is a pole mount for the gen 3 Starlink dish. It's based off a 3d scan of the kickstand that I modified. I originally made the 1.65 inch mount specifically for the Harbor Freight telescoping flag pole and then added a few more sizes that were requested. Unfortunately I've gotten well over 100 requests for different pole sizes and I do not have the time to make a version for each message I get. The mount is secured to the pole using two 1-in to 3-in hose clamps. It is a very snug and solid mount, but use it at your own risk.
 

There are two different versions of each pole size. One that is a single piece which requires a lot of support and one where the tabs are separate pieces that have to be glued into place. The cut version is easier to print with much less support, but requires more work sanding and filing down the sides of the tabs to get a snug fit into the body of the mount. You will have to secure the tabs into the body with super glue as they can still pop out without it. When inserting the tabs make sure the slanted side are facing outward and that there isn't a lip on the angled portion facing the front. I added a photo of the cut tabs installed for reference.

The print profiles should have support blockers on the sides and circular parts of the model but if they don't I included a screenshot for one of the cut models to show what the support should look like.

If you print my model and it works well for you please rate and comment letting me know how it turned out.