Helldivers 2 Pelican-1 ship DND Mini Scale - Free 3D Print Model

Search models, users, collections, and posts

TheFestiveMedic

Miniatures>Other Miniatures

IP Report

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

115% scale, 0.16mm layer, 3 walls, 15% infill

Designer

21.9 h

1 plate

4.4(22)

Open in Bambu Studio

Boost

563

1543

921

259

Released

Description

The extraction ship Pelican 1 from Helldivers 2. Fixed and scaled for dnd miniatures!

I recommend 115% scale (the main profile & pictured) to account for the bases of 28mm minis, 135% would account for all ‘28mm’ minis fitting in the ship but it looks way too big.

Known issues: be careful of the landing gears, thrusters, and landing gears under the runway, as there is alot of support around them. Runway could probably use some more love as well tbh.

Comment & Rating (24)

@user_806938412

Print Profile

115% scale, 0.16mm layer, 3 walls, 15% infill

This is not a good print. this was supposed to be a day and half print good thing I scaled it down. the roof of the ship didn’t completely print you can see the holes in my photos

@Idontexist

I think you could have bad filament because mine printed just fine

@user_2916166185

Boosted

Print Profile

115% scale, 0.16mm layer, 3 walls, 15% infill

print to a while and the supports were annoying to remove but it was worth it

@user_3089362086

Print Profile

115% scale, 0.16mm layer, 3 walls, 15% infill

its looks amazing but if you think about printing this I want to warn you about the forest of tree supports and to watch it at the start because my first attempt wasn't the best but overall in the end it looks good

@RedhawwK

Print Profile

115% scale, 0.16mm layer, 3 walls, 15% infill

excellent print that I printed at 75% size with a 45 degree angle the supports were a bit hard to remove (I broke the front landing gear, my fault)

Show original

@K52LT

Print Profile

115% scale, 0.16mm layer, 3 walls, 15% infill

Looks great! I printed it at 50% size and had some parts come out to thin. I could have also gone for thinner layers. Really though I made it for my kids to play with. So mission successful! Thank you for the awesome model!

@Mr.Phox

Print Profile

115% scale, 0.16mm layer, 3 walls, 15% infill

Good model, I scaled it up a lot to use in 28 MM scale and I'm in the middle of buff and sand.

@PattyWithAP

Print Profile

115% scale, 0.16mm layer, 3 walls, 15% infill

Looked great but I scaled it down so it looked a little funny

@WLMCr8s

Print Profile

115% scale, 0.16mm layer, 3 walls, 15% infill

The supports take care to remove but very cool print.

@Stephenrob1991

this as a ps5 controller holder

(Edited)

@LucasLucas

Print Profile

115% scale, 0.16mm layer, 3 walls, 15% infill

it’s cool

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.