Beer shotgun tool (Crack In)

A nice beer shotgun tool that I share on Makerworld. Fully functional, and fully 3D PRINTED. 

Please use a screvdriver, or something pointy to remove the supports in the hole.

Thanks for all the support guys, any feedback is appreciated. 

3D printing is not considered fully foodsafe please educate yourself before printing:

https://blog.prusa3d.com/how-to-make-food-grade-3d-printed-models_40666/

or click here

Shoutout to Jimmys Prints (@user_297376026) for providing print profiles, before I made my own. You can definately use his if you want to;)

Documentation / Guide:

You will need to remove the brim at first, which can easily be done by hand.

For the inner supports I reccomend something sharp like a screwdriver or a pointy tool like this (mine is from IfixIt)

Start by removing the outer supports (as seen on the image) and don't forget the bottom ones.

After this grab your tool of choice and proceed to remove the inner supports.

And done ;)

PS: sorry for the vertical images, Makerworld didn't let me upload them horizonatlly