Campfire stick holder
Print Profile(1)
Description
Holder for stick when you need to cook something on campfire during camping or fishing. Very simple and reliable principle. Tested on several camping and fishing sessions with very positive feedback from friends - many of them asked me to print it for them ;-) .
Usage description
- Fixation
By default, the holder is fixed with the shaft and the stand. To fix the stand, you can find a big piece of wood or stone around. This is, in my opinion, the easiest and most reliable way.
But if you have limited space or are restricted on carrying weight, you can exclude shaft and(or) stand.
If the angle is too low or too high, you can use a stand spacer to change the range of the angle. But in my experience, I never need this.
- Control
Horizontal alignment is controlled by turning the holder around and securing it with a screw. But you will mostly do vertical alignment controlled by the top screw.
Printing
- Screws must be printed with 0.12 layer height - already implemented in print profile and 3mf file
- On the screw attachment part are 2 pieces of support, make sure you remove them
Membership
Subscribe to get commercial license.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)