Sci Fi Sword (Collapsible) - Free 3D Print Model

Search models, users, collections, and posts

Eluded Studios

Props & Cosplays>Cosplay Weapons

IP Report

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

7.6 h

2 plates

4.6(22)

Open in Bambu Studio

Boost

167

298

359

161

Released

Description

Introducing the Sci Fi Sword. Where the classic sword meets future tech. Bringing the SciFi hilt and a laser like blade. The blade can be printed in place or printed separately and assembled. The hilt has a screw-in cap for ease of replacing the blades.

sword

collapsing

scifi

Comment & Rating (31)

@quadbears

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Sword handle is amazing!....blade is really bad. really weak...never had a blade fail this hard. EDIT: Replaced the blade with AMS. turned out MUCH better. still slightly thin. but it actually works

(Edited)

The profile uploader has replied

@EludedStudios

Glad you got one that worked better. I printed in a Silk PLA and it indeed broke apart like your images. But with PLA Basic and Matte, they had no issues and held together. Might be a little blame on the filament, but I will try to make something stronger next time. I appreciate the call out and highlighting this.

(Edited)

@user_1275404961

Print Profile

0.2mm layer, 2 walls, 15% infill

cool

@Ghost_Dragon

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed great first try! I look forward to assembling it.

@elliott.scott.r

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed nice. Thanks

(Edited)

@user_3513050151

I’ve attempted to print the blade out both in PETG basic and PLA basic, and both times I could not get the blade to separate as it appeared to have fused together along the seams, is there some setting I’m missing to get this to print properly? (printed on a brand new X1C from the handy app)

(Edited)

@user_1379184109

Same here. I printed with PETG and it failed at 97÷ because of height... and I also couldn't unstick it :(

@rob777

Print Profile

0.2mm layer, 2 walls, 15% infill

@CB3DPrint

What color is that blue?

The designer has replied

@EludedStudios

This filament is Bambu PLA Silk Blue (13601).

@eatmybeans

Don't download. Print is COMPLETELY broken, the blade is fused together and does not uncollapse. Complete joke.

@FuzzyFace_NB

Boosted

This sounds like either a filament or printer issue. I printed the blade with no issues.

@Zerethusta

Printed in PETG and the smallest portion of the blade was the only one that would separate. After some investigation it's the seam causing the problem (the tolerances are tight enough that it fuses the parts). Setting to random seam placement worked, and splitting the objects that make up the blade and printing separately would work as well though it adds a good amount of time to the print. Works well from what I can tell, have to wait until they're in the kiddos' hands to see how it holds up.

@brexasaurus

Print Profile

0.2mm layer, 2 walls, 15% infill

attempted PETG with the blade and all layers adheared to one another and would not break loose. Probably something I did.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.