Search models, users, collections, and posts
Ender 3 (V2&PRO) ADXL345 Bed Mount
Remixed by
IP Report
Print Profile(1)
0.2mm layer, 4 walls, 25% infill PLA
23 min
1 plate
Open in Bambu Studio
Boost
35
76
6
2
142
37
Released
Description
I made a remix of this. I add the bottom protection in order prevent the screw to damage the PCB on the back of the bed and made some wall thicker to reduce the flex.
Print the 2 parts and assembly using an M3 nut and max 10mm screw to clamp it to a bed + two M3x8 screws to fix the ADXL354 to the printed part. I recommend 100% infill for the small part (adxl-protection-bed) and for the bigger one, your usual settings, but more perimeters will make it stiffer.
If you have a thicker or thinner bed you could scale the big part in slicer on only one axe.
This remix is based on
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (6)