CY02 EYEWEAR FRME

This is a men's optical glasses designed by a professional designer. The frame of the glasses complies with the design specifications of optical glasses. The structure of each part of the glasses has been fully designed and verified. The nose pads of the glasses are heightened to adapt to Asian vision. The glasses The tail ends of the legs are thickened to increase the weight of the tail ends and fit the head to prevent falling off.No supports are needed to 3D print.Any additional metal fittings are also required for assembly.The glasses frames have a thickened design, which has higher strength and is not easy to break and can be used for a longer period of time.The glasses frame has a bevel design to increase the three-dimensional sense of the human body. At the same time, the column chain of the glasses frame is fully enlarged to prevent breakage. At the same time, no metal screws are needed. A piece of PLA filament with a diameter of 1.75mm can be cut to serve as a rotating shaft.Of course, metal screws can also be installed. The size is suitable for most men, the total width of the frame is 150mm. The length of the legs is 145mm. The angle between the legs and the frame is 9°. The size of the frame is 58□18-145.Assembly instructions: 1. Please cut a piece of PLA filament with a diameter of 1.75mm to serve as a rotating shaft. 2. Please use a machine to heat the middle of the temples, then manually bend the temples (refer to the picture).

This is a professional designer-designed men's optical glasses, the frame conforms to the optical glasses design specifications, the structure of each part of the glasses has been fully designed and verified, and the nose pads are heightened to adapt to Asian vision. The tail ends of the legs are thickened to increase the weight of the tail ends and fit the head to prevent falling off. No supports are needed for 3D printing. No additional metal accessories need to be assembled. The glasses frames are thickened, with higher strength, less prone to breakage, and can be used for a longer period of time. The glasses frame has a bevel design to increase the three-dimensional sense of the human body, and the column chain of the glasses frame has been fully enlarged to prevent breakage. Also, no metal screws are required, just cut a piece of 1.75mm diameter PLA filament to serve as a rotating shaft. Of course, metal screws can also be installed. The size is suitable for most men, the total width of the frame is 150mm. The length of the legs is 145mm. The angle between the legs and the frame is 9°. The size of the frame is 58□18-145. Assembly instructions: 1. Please cut a piece of 1.75mm diameter PLA filament to serve as a rotating shaft. 2. Please use a machine to heat the middle of the temples, then manually bend the temples (refer to the picture).