Bells from Hell - Free 3D Print Model

Search models, users, collections, and posts

Solid

Hobby & DIY>Other Hobby & DIY

IP Report

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 2 walls, 15% infill

Designer

40 min

1 plate

5.0(1)

0.12mm layer, 4 walls, 100% infill

Designer

10.8 h

8 plates

Open in Bambu Studio

Boost

Released

Description

Each model is a little piece of my passion for design, creativity, and bold ideas

Boost Me (for free)

👉 give Solid a boost and support me on MakerWorld :-)

Membership

👉Want to sell 3D prints of my models? Get a Commercial License to support my work

Join

Ich habe diese Glöckchen zum Grundangeln entworfen . Benutze diese schon seit einiger Zeit und bin damit ganz zufrieden.

Die Box habe ich nochmal etwas abgeändert damit sich es besser drucken lässt. Box ist aus PETG

Die Glocken sind aus PETG-CF und PETG .Das weiße Material ist PETG-Clow in the Dark .

Man kann alles gut aus PETG Drucken.Nur der Kern mit dem M12 Gewinde sollte aus dem PETG-CF sein oder vergleichbarem festen Filament.

Material:

Schrauben 2 X M3x25 & 2xM3 x16
https://www.amazon.de/dp/B09P8HXFGF?psc=1&ref=ppx_yo2ov_dt_b_product_details

Viel Spaß damit :-)

fishing bite indicator

Comment & Rating (11)

@Bondii

It would fit in terms of size, but the print quality is somehow lacking

The designer has replied

Show original

@Solid.lab

It needs to be printed finely and not too quickly, these are small parts The filament should be thoroughly dry I always print PETG quite hot to ensure good layer adhesion Depending on the printer, you may need to calibrate the filament

Show original

@Bondii

Replying to @Solid.lab :

Hmm, I tried it with PLA

Show original

@Solid.lab

Replying to @Bondii :

That's certainly possible, however, it should be noted that PLA is rather unsuitable for parts exposed to the elements. I would recommend a technical filament such as PETG. 100% infill

Show original

@Sigmo

The fish bell is simply super, with the adapter for normal bells I find the bell even better – the holder is perfectly suited for normal glow sticks – however, I tried to redesign this for flashing battery glow sticks (a little thicker, 27 mm long and an approx. 1 cm long M5 internal thread). I printed the whole thing with the BambuLab P2S and the quality is top - I printed the nut and the adapter for the bell in PLA-GLOW, the rest in PETG and it holds up great so far

The designer has replied

Show original