Search models, users, collections, and posts
Squeeze Fan
Remixed by
IP Report
GIF
GIF
Print Profile(5)
0.2mm layer, 4 walls, 50% infill
Designer
3.9 h
1 plate
PLA 0.2mm layer, 2 walls, 25% infill
Designer
4.1 h
1 plate
Optimized for Strength & Precision
7.9 h
3 plates
0.2mm layer, 4 walls, 50% infill
3.8 h
1 plate
Click to see more
Open in Bambu Studio
Boost
2019
4399
738
170
10.6 k
6.2 k
Released
Description
Just in time for summer, it's a squeeze fan!
This is an adaptation of my favorite version posted on Thingiverse many years ago, updated for the speed of Bambu printers. You can download updated blades (and gears) if you want an even more powerful version.
If spinning too fast, the cover may separate from the case if the pins are too loose. Once everything is working well, I recommend a little glue on the pins to keep everything together.
The default print profile is everything you need on one plate in PLA. If you plan on using this regularly in the summer, I recommend using the second profile which has more infill, and used PETG.
This remix is based on
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (738)