Search models, users, collections, and posts
Filament Box Pull (Upcycle filament boxes)
IP Report
Print Profile(2)
3-Pack - 0.28mm layer, 2 walls, 15% infill
Designer
40 min
1 plate
Straight Edge Version - 0.28mm layer, 2 walls, 15% infill
Designer
23 min
1 plate
Open in Bambu Studio
Boost
212
564
30
31
190
120
Released
Description
When placing filament boxes on shelves for storage, these pulls can be slipped into one of the sides on top or bottom (or if horizontal) and used as pulls to aid in grabbing the box off the shelf with one hand.
- No supports needed, fully printable in place.
- Available as a 1, 3, or 10 pack print in profiles.
- Can be placed on ‘top’ or ‘bottom’ edge depending upon shelf-height and comfort
- Can be used as filament swatches for easy identification on boxes.
- Built-In teeth to grab the corrugated cardboard
- Use one as a reusable tool or many to have each box ready to grab
- Compatible with any box with a creased-side facing out.
- Thickness tuned for ‘E-Flute’ corrugate, up to ‘C-Flute’ thickness.
- For corrugate thicker than C flute, simply up-scale the model in your slicer.
Update:
At a user's request, I've added a version that can be used with boxes that have their labels on the ‘top’ or ‘bottom’ edges to keep them visible. See ‘Straight Edge Version’ in Print Profiles
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (30)