Nano QX 3d FPV cam mount

About as easy as it gets for mounting your Spektrum FPV camera to your QX3d. Just slide it on (friction fit) and add a bit of double sided tape to mount the camera. If the fit is a bit loose, just fold a piece of thin tape over the Qx fin to shim it out.

In the FPV viewfinder, the "feet" of the QX act like a horizon markers and you can just see the props below. Really nice for orientation.

For bonus points cut one end off of a 1s charge lead and solder it to the back of the Nano's charge leads to run the camera directly from the QX battery. Make sure the props aren't going to hit the wires

Printed in PLA with two walls and 30% fill. Weight=1 gram