McShakyFPV

cover

IMG_3250_778c5880-1e6b-461b-ba5e-24ca3095aeb6.jpeg

plate_1.png

IMG_3250_778c5880-1e6b-461b-ba5e-24ca3095aeb6.webp

plate_1.webp

Screenshot 2024-05-18 at 3.39.54 AM_d70472bf-5272-42ff-81fc-3686b4407147.webp

I used ABS from Bambu to make this. &nbsp;I twist it onto the 5mm motor post then put the prop on and tighten it down using the prop nut.

0.2mm layer, 11 walls, 90% infill

I purchased some bi-blade propellers from Master Airscrew and they didn&#39;t fit my motor shaft on my 10&#34; FPV drone. I printed this with Bambu ABS on a X1 Carbon with a .4mm hot end.Master Airscrew Propeller MR Series 10x4.5

Propeller hub converter to fit a 5mm motor shaft

ASIA

Print Profile(1)

Description

Comment & Rating (0)

License

Related Models