Search models, users, collections, and posts
Cute Highland Cow
IP Report
Print Profile(2)
Multicolor 4 Color 0.16mm layer, 3 walls, 15% infill
Designer
8.1 h
1 plate
7 Cows- Calibrated Flush 0.16mm layer, 3 walls, 15% infill
15.9 h
1 plate
Open in Bambu Studio
Boost
350
641
67
59
712
410
ReleasedÂ
Description
Tips for printing:
- Supports: Yes (tree)
- Layer height: 0.16mm (optimal)
- Wall loops: 3
- Infill: 15%
- Seam position: back
- Wall generator: Arachne
- Brim: Yes
Colors and filament I used (4 Color Version):
- PLA / White - for the horns
- PLA / Black - for the feet
- PLA / Dark Brown - for the body
- PLA / Pink - for the snout
Or decide for yourself which colors and how many you want to use!
When you decide to print my multicolor Pre-Sliced (3mf file) for BambuLab I would recommend printing several models at once, not just one, to reduce waste!
Use Supports for the snout as shown in the picture below!
Boost Me (for free)
If you enjoyed this model, please consider boosting it to support me to further develop creative and more cute looking designsđĽ°. Thank you!
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivatives
Comment & Rating (67)