mourice4

0.2mm layer, 3 walls, 15% infill

StormaX

Please attempt to download and slice the models yourself instead of using the independent print profile. This will likely solve your issue. I will say however, that I did try the slicing myself with this profile and no problems presented themselves. 

Slicing failed...Ich würde es gerne drucken funktioniert aber nicht

Slicing failed I would like to print it but it does not work

Carnyx

Please remember that you are referencing an independent print profile. Creating your own profile with the raw files should make it so it works as is shown in the image, as these files were exactly what I printed for the image. 

Passt leider überhaupt nicht der ring zum befestigen des Schlauches sieht auf Platte 3 ganz anders aus als auf dem Galeriebild. somit leider unbrauchbar da der schlauch 150mm durchmesser nicht passt 

Unfortunately, the ring for attaching the hose doesn't fit at all The ring on plate 3 looks completely different from the gallery image Therefore, it's unusable because the 150mm diameter hose doesn't fit

user_2976821512

The unit looks similar, but maybe a bit smaller. I can't guarantee any compatibility.

Is this also compatible with this unit?
TROTEC PAC 2100 X
https://en.trotec.com/shop/local-air-conditioning-pac-2100-x.html

user_3792157050

Actually fitted great. Would be nice if you could add a bit more info to the post though, like for what model it is and stuff.

rockyx

Hallo,
kannst du mir sagen was für einen Durchmesser dein Abluftschlauch hat den du dafür verwendet hast?
Gruß

Hello,
can you tell me what diameter your exhaust hose is that you used for this?
Regards

3Drucker3D

ich würde es auch gerne Drucken, hast Du für mich die Maße des Teils? Hab leider eine andere Klimaanlage hoffe aber es passt trotzdem.

I would also like to print it, could you provide me with the part's dimensions?  Unfortunately, I have a different air conditioner, but I hope it fits nonetheless

Pascal 3D

Chris

Hose Adapter 150mm with threads

user.1220

cover

ABVddZc_09da3fda-4ac2-4818-9f17-6d199822a2f9.jpeg

plate_1.png

plate_2.png

printing

plate_3.png

plate_4.png

plate_5.png

Change Preset Hight to 0.12 for this plate

plate_6.png

plate_7.png

GgK685

WhatsApp Bild 2025-06-27 um 20.12.07_bf2b9202.jpg

Added one extra wall for stability. Little supports needed.&nbsp;IMPORTANT: Change the Layerhight preset for plate 6 to 0.12mm. Otherwise supports will be needed.&nbsp;You will also need longer screws than in the AC unit. (or you could use Ducttape like me)

Petunien

Image.png

Image 2.png

I modified the hose adapter part because it originally lacked threads to properly screw onto a 150 mm hose.You can now simply screw it onto the hose, and it fits securely.I printed it with a 0.12 mm layer height, but 0.20 mm should work just fine as well. I highly recommend using PETG or a similar material, as it offers better resistance to heat and mechanical stresses. I modified this part for the threads: https://www.thingiverse.com/thing:5475004

Mobile AC dual hose adapter&nbsp;As requested by some users, here&#39;s some additional information: AC Unit: COMFEE Mobile AC, 9000 BTU/h MPPH-09CRN7, bought in 2022 from Amazon&nbsp;I believe other AC units use the same, or very similar, back end designs. You&#39;ll just have to see if it works for other units too.

Print Profile(2)

Description

Comment & Rating (15)

License

Related Models