Search models, users, collections, and posts
Sligthly overengineered desk clamp
Print Profile(2)
0.16mm layer, 3 walls, 15% infill, PLA
Designer
1.7 h
1 plate
0.16mm layer, 2 walls, 15% infill
1.9 h
1 plate
Open in Bambu Studio
Boost
339
872
126
53
2 k
1.3 k
Released
Description
UPDATE 2024/05/31: Added an improved version of the screw and insert for a better fitment of the threads, also .3mf files
--------------------------------------------------------------------------------------------------------------------------------------------------
Print Instructions:
Everything can be printed in place without supports with at least 10% infill. PLA works well, for more strength print with at least 3 walls. Just take care of the M14 thread insert and the screw by using 0.12 or 0.16 resolution and maybe a lower printing speed to make both parts fit perfectly.
Assembling:
- Push the insert into the clamp body.
- Put the screw in and test its functionality.
- Mount the stopper on the screw
- Place the whole clamp on your desk
Enjoy!
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (126)